The Threaded Standoffs provided by Mustang Systems is made of colorless brushed anodized aluminum and allows you to enhance your signage.

– ∅ 19mm (3/4″)
– Projection: 25mm (1″)
– Panel thickness up to 13mm (1/2″)
– Panel hole ∅ 9,5mm (3/8″)

Ixbond connects 3-10mm panels infinitely and free of torsion. The face joint remains at a discrete 6mm gap. The screw can be mounted from both sides. Convenient if you create structures in 3-d or close to walls. Ergonomic and decorative recessed grips make mounting easy.

The GHOST Invisible Standoffs supplied by Mustang Systems allow you to enhance your signage and are a synthetic option that mounts the sign to the spacers using a strong glue, preventing the spacer from being visible from the front. In addition, the GHOST offers a larger contact surface giving the possibility of being screwed behind the sign, thus allowing heavier and more bulky loads.

– Projection; 20mm (13/16″)
– Diameter 16mm (5/8'')

This item is sold in a box of 4

LIQUIDATION

The Ajustable Wall Clamp Sign provided by Mustang Systems allows you to enhance your signage.

– Silver glittery • Length : 60mm (2″)
– Panel thickness : 3mm to 10mm (1/8″ to 3/8″)
– Maximum weigth : 15Kg
– Allen Key required

* Glittery finish is unique to this item and is very different from the matte finish of the MSB80 - MSB120 and MSB180

The adjustable top fixing for suspension cable from FitCable® is even faster and easier to install. Compatible with a 7x7 galvanized steel cable - Ø 1.2 mm

Compatible with the FC-ACC2 threaded T-bar twist clip for suspended ceiling tracks

Working load up to 50 kg - Safety factor 5:1

Use:
For building shelves, seats, desks and bookcases, etc. A couple of 90° connectors can make a T-joint. Triplets of 90° connectors can make a cross joint. For panels between 16-19mm thick, suitable for indoor and outdoor use.

Material :
High-tech reinforced polymer, flame retardant and heat resistant. Resistant to humidity and UV rays without fading. Can support up to 120 kg depending on use and position of the structure. Each support can be reused endlessly, has a modern design and is easy to use and position.

Playwood has revolutionized the world of DIY in a simple and intelligent way; it allows two or more panels to be assembled without using specific tools or knowledge. Designed for intelligent use of materials to avoid their dispersion into the environment, the connectors can be reused throughout their life. Everyone, thanks to the connector, will be able to design and make their own furniture without effort or the need for special manual skills and experience!

Strong and durable, suitable for indoor and outdoor use, the connector is equipped with a stainless steel screw which, when tightened or loosened using an Allen key, grips the panels like pliers, avoiding thus perforating the panels and using a drill or screwdriver. So the furniture can be assembled and disassembled in a minute, and it can be changed and redesigned as often as desired.

The Vertical Mixt Totem allows you to highlight your advertising.

– 2 Stainless steel rods – T10-TIGE100 – 1m (3’3″)
– 2 Stainless steel rods – T10-TIGE80 – 0,8m (2’7″)
– 8 Panel supports for up to 6mm (1/4″) – T10-SP1
– 1 Portrait poster holders – 202/US – (11″ X 17″)
– 1 Folder distributor – 502/US
– 1 Poster holder clamp
– 1 Metal rectangular plate (grey marble) – PLA400/US
– 2 Allen keys

The Totem Vertical Mixt allows you to highlight your advertising.

– 2 Stainless steel rods – T10-TIGE100 – 1m (3’3″)
– 2 Stainless steel rods – T10-TIGE80 – 0,8m (2’7″)
– 6 Panel supports for up to 6mm (1/4″) – T10-SP1
– 1 Portrait poster holders – 201/US – (8,5″ X 11″)
– 1 Folder distributor – 501/US
– 1 Metal rectangular plate (grey marble) – PLA400/US
– 2 Allen keys

The Snap Frame provided by Mustang Systems are versatile, easy to install and easy to use. The frames made of lightweight aluminum profiles are ideal for displaying prints, posters, photographs, promotional graphics & temporary signage.

– Available in 25mm profile / 45°
– Poster Size ; 216mm X 279mm (8,5″ X 11″)
– Copy Area ; 198mm X 261mm (7-13/16″ X 10-1/4″)

The Sneeze Guard Threaded Support provided by Mustang Systems is designed to hold acrylic panels to act as a physical barrier to prevent the spread of germs and avoid direct contact with people.

Material: Steel chromeplated
Panel thickness 3mm @ 6mm (1/8″ @ 1/4″)

The Acrylic Sneeze Guard provided by Mustang Systems is designed to act as a physical barrier to prevent the pread of germs and avoid direct contact with people.

Material: PMMA
Thickness: 5mm (3/16″)
Dimension: 800mm X 600mm (31-1/2″ X 23-1/2″)
Hole at bottom: 400mm X 200mm (15-3/4″ X 8″)

The Acrylic Sneeze Guard provided by Mustang Systems is designed to act as a physical barrier to prevent the spread of germs and avoid direct contact with people.

Material: PMMA
Thickness: 5mm (3/16″)
Dimension: 700mm X 600mm (27-1/2″ X 23-1/2″)
Hole at bottom: 460mm X 200mm (18″ X 8″)

The Floor Stand Sign Holder provided by Mustang Systems is reversible in portrait & landscape. The angle of the floor stand sign holder is for the eye level.

- Two adjustable positions: landscape and portrait
- Available in 8.5" x 11 and 11" x 17" sizes
- Adjustable viewing angle
- Fixed height
- Base powdered coated steel in RAL 900
- Brushed aluminum pole

Height: 1000mm (39-3/8″) Portrait
Height: 964mm (37-15/16″) Landscape
 

The Hanging Cable Kit combined with the ∅ 1.5mm stainless steel cables allows one or more panels to be fixed to the ceiling. These kits are used to vertically suspend & display many items.

Add 8mm to the left & 8mm to the right of your panel to calculate the distance between each ∅ 1,5mm cables.

– Top fixing ∅ 18,5mm (3/4″)
– Stainless steel cable ∅ 1.5mm – 2m (6′-6″)
– Panel thickness up to 6mm (1/4″)
– Allen key & screws supplied

The Aluminum Sign Mounts provided by Mustang Systems allows you to enhance your signage.

– Silver
– Length: 120mm (5″)
– Panel thickness: 3mm to 6,5mm (1/8″ to 1/4″)
– Maximum weight: 7Kg
– Allen Key required

The Colored Threaded Standoffs provided by Mustang Systems is made of colorless brushed anodized aluminum and allows you to enhance your signage.

– ∅ 13mm (1/2″)
– Projection: 19mm (3/4″)
– Panel thickness: up to 10mm (3/8″)
– Panel hole: ∅ 8mm (5/16″)

The Aluminum Screw Cover Cap provided by Mustang Systems made of colorless brushed anodized aluminum allows you to enhance your signage.

– Silver finish
– ∅ 18,5mm (3/4″)
– Panel hole ∅ 6,5mm (1/4″)

The Sneeze Guard Clamp Support provided by Mustang Systems is designed to hold acrylic panels to act as a physical barrier to prevent the pread of germs and avoid direct contact with people. Clamp sold individually.

– Material ; Zinc-alloy
– Panel thickness 5mm – 22mm (3/16″ – 7/8″)
– Desk/table thickness up to 40mm (1-1/2”)

The Aluminum Screw Cover Cap provided by Mustang Systems made of colorless brushed anodized aluminum allows you to enhance your signage.

– Matte Black finish
– ∅ 24,5mm (1″)
– Panel hole ∅ 6,5mm (1/4″)
 

The Brass Plated Screw Cover Cap provided by Mustang Systems made in brass plated allows you to enhance your signage.

– ∅ 25mm (1″)
– Panel hole ∅ 6,5mm (1/4″)