The Suspended Support provided by Mustang Systems is used to vertically suspend acrylic signs, panels & posters. The support is made of colorless clear anodized aluminum.

– Panel thickness up to 10mm (3/8″)
– Support ∅ 18,5mm (3/4″)
– Can be used with twist clip for suspended ceiling tracks FC-ACC2 (see pictures)
– 6mm rod and FC-ACC2 clip are sold seperately

The Suspended Support provided by Mustang Systems is used to vertically suspend acrylic signs, panels & posters. The support is made of colorless clear anodized aluminum.

– Panel thickness up to 6mm (1/4″)
– Support ∅ 18,5mm (3/4″)
– Can be used with twist clip for suspended ceiling tracks FC-ACC2 (see pictures)
– 6mm rod and FC-ACC2 clip are sold seperately

The Double Panel Support up to 10mm (3/8″) is made of colorless clear anodized aluminum.
Compatible with 10mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18mm (3/4″)
– Panel thickness up to 10mm (3/8″)

The Double Panel Support up to 6mm (1/4″) is made of colorless clear anodized aluminum.
Compatible with 10mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18mm (3/4″)
– Panel thickness up to 6mm (1/4″)

The Single Panel Support up to 6mm (1/4″) is made of colorless clear anodized aluminum.
Compatible with 10mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18mm (3/4″)
– Panel thickness up to 6mm (1/4″)

The Single Panel Support up to 10mm (3/8″) is made of colorless clear anodized aluminum.
Compatible with 10mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18mm (3/4″)
– Panel thickness up to 10mm (3/8″)

The Pierced Single Panel Support up to 6mm (1/4″) is made of colorless clear anodized aluminum.
Compatible with 6mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18,5mm (3/4″)
– Panel up to 6mm (1/4″)
– Hole ∅ for panel 4,75mm (3/16″)

The Double Panel Support up to 10mm (3/8″) is made of colorless clear anodized aluminum.
Compatible with 6mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18mm (3/4″)
– Panel thickness up to 10mm (3/8″)

The Double Panel Support up to 6mm (1/4″) is made of colorless clear anodized aluminum.
Compatible with 6mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18mm (3/4″)
– Panel thickness up to 6mm (1/4″)

The Single Panel Support up to 10mm (3/8″) is made of colorless clear anodized aluminum.
Compatible with 6mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18mm (3/4″)
– Panel thickness up to 10mm (3/8″)

The Single Panel Support up to 6mm (1/4″) is made of colorless clear anodized aluminum.
Compatible with 6mm rods only.

Add 9mm to the left & 9mm to the right of your panel to calculate the distance between each ∅ 6mm rods.

– Support ∅ 18mm (3/4″)
– Panel thickness up to 6mm (1/4″)